Alright, here goes nothing. 1) I disassemble my laser into a few large parts, The nozzle The butt And the core 2) Grasp the core component and twist sharply until a click is heard. The shell of the core should split, exposing wiring, circuitry and the nuclear battery box. [b][CAUTION][/b] Radiation poisoning is a serious threat. Do NOT open the battery box without proper hazmat gear or suit. 3) On the battery box is a key pad. Enter the code given on purchasing a factory product, and the battery box should unlock, revealing the generation module. 4) Because the energy regeneration module is unstable when not placed in the pressurized battery capsule, and sharp movements will cause it to violently discharge. [i]carefully[/i] place it near one corner of the box. 5) using spare wiring, solder together a circuit capable of sending a rapid electrical pulse into a cell, and regulates the discharge to about 1000 gigawatts. 6) attach an electrical conductor onto the surface of the box, then link the wiring. 7) activate the switch. The box should begin to heat up rapidly, and he electric discharge will disintegrate the surface of the box. [b]8) you'd better hope there's not a bomb in the box.[/b]